From Process Phases
to the Right Separation Technology
A structured engineering route from the client phase list to a defensible separation technology shortlist.
STREAM
COMBINATION
SHORTLIST
What phases are present
in your process stream?
Select all phases present in the separation duty. The phase combination determines the relevant engineering case.
Select one or more phases
Define what must be separated and the required outlet streams before selecting equipment.
From enquiry to technology shortlist.
A structured route keeps the separation duty, technology choice and validation requirements aligned.
Establish the Duty
Identify the required outlet streams and define the process separation duty.
Route the Enquiry
Match the phase combination to the relevant separation case and engineering route.
Select Technology
Follow the case flowchart and application notes to establish suitable technology candidates.
Validate Before Selection
Confirm the design basis, separation performance, operability and verification boundaries.
SELECTION LOGIC Equipment is selected after the separation duty and required performance have been established.
VIEW MASTER FLOWCHART →Follow every applicable branch.
Start with the required products and actual phases at operating pressure and temperature. Identify every applicable separation duty before selecting the technology combination.
Gas components need separating?
Different molecular gas components require selective separation or a phase-changing process.
CO₂, CH₄, H₂, N₂, O₂ and similar molecular separation duties.
Free gas and liquid both present?
Confirm the presence of free gas and liquid at the actual operating conditions.
Provide the required gas-liquid disengagement duty.
Two immiscible liquids need splitting?
Confirm that the two liquid labels represent distinct immiscible phases.
Consider liquid-liquid separation and emulsion behaviour.
Suspended solids need removal?
Identify whether solids must be removed from the gas, liquid or multiphase stream.
Route to the applicable gas-solid, liquid-solid or multiphase duty.
Two solid fractions need separate products?
Confirm a measurable property contrast between the required solid products.
Use the applicable size, density, magnetic or surface contrast.
Required data or proof still missing?
Do not treat unknown information as a negative answer.
Obtain samples, process data, separation tests or a feasibility study.
Use the 20-case combination index and integrate all applicable separation duties into the proposed treatment sequence.
Are all duty, operating, safety and disposal requirements met?
YES → Technology shortlist confirmed / NO / UNKNOWN → Revise, test or hold
The arrows show technology-selection logic, not a P&ID. An OPTION is a candidate; an ADD box identifies a conditional stage. Complex feeds may require several linked separation duties.
Find your separation case.
Twenty defined phase combinations provide the starting point for routing an enquiry to the appropriate separation technology.
Gas — Gas
Separation of gas components or mixed-gas streams.
Gas — Liquid
Free-gas and liquid disengagement duties.
Gas — Solid
Removal of solid particles from a gas stream.
Liquid — Liquid
Separation of immiscible or difficult liquid phases.
Liquid — Solid
Removal or recovery of solids from a liquid stream.
Solid — Solid
Separation between different solid fractions.
Gas — Gas — Liquid
Selective gas absorption followed by gas/liquid separation.
Gas — Gas — Solid
Gas purification using a solid adsorbent.
Gas — Liquid — Liquid
Three-phase gas, oil and water separation.
Gas — Liquid — Solid
Multiphase separation involving gas, liquid and solids.
Gas — Solid — Solid
Gas carrying multiple solid particle fractions.
Liquid — Liquid — Solid
Liquid-liquid separation with associated solids.
Liquid — Solid — Solid
Classification of two solid fractions in liquid.
Gas — Gas — Liquid — Liquid
Gas upgrading with hydrocarbon condensate and water.
Gas — Gas — Liquid — Solid
Wet and dusty gas requiring component removal.
Gas — Liquid — Liquid — Solid
Four-phase gas, oil, water and sand separation.
Gas — Gas — Liquid — Liquid — Solid
Mixed-gas upgrading with condensate, water and sand.
Liquid — Liquid — Solid — Solid
Liquid separation with two recoverable solid fractions.
Gas — Liquid — Solid — Solid
Aerated slurry containing multiple solid fractions.
Gas — Gas — Liquid — Liquid — Solid — Solid
Complex wet mixed-gas stream with liquid and solid fractions.
Gas-Gas
Separation of molecular components within one gas phase
Gas-Gas Separation
Separate molecular components within one gas phase.
Technology Option
Technology description.
Technology Option
Technology description.
Technology Option
Technology description.
Limits / Common Selection Errors
Validation Required
VALIDATEGas – Gas
CO₂ / CH₄ · H₂ / CH₄ · N₂ / O₂
Separate molecular gas components
Separate molecular components within one gas phase and define the valuable product together with its required purity and recovery.
Follow the applicable case flowchart
Compare candidate arrangements against the actual process conditions, outlet requirements and available operating data.
Membrane / PSA
Consider for compatible gas pairs when pressure and regeneration conditions are practical.
Absorption / TSA
Consider solvent affinity or strong selective adsorption, including trace polishing.
Cryogenic / Hybrid
Consider recoverable condensables, multiple products or suitable larger-scale duties.
CONDITIONING
MODULE
POLISHING / COMPRESSION
Reject gas → recovery, recycle or authorised treatment.
Gas purity and recovery are different objectives. Assess both with a component mass balance.
Validate before selection
Require a process simulation or vendor model across the operating envelope, supported by separation data for the actual mixture.
SEPARATION DATA REQUIRED
From separation duty
to a defensible shortlist.
Select the separation mechanism against the actual duty, required outlet streams and governing physical properties. Equipment is selected only after the duty is defined.
Establish the duty
Identify what must be removed, recovered, retained or allowed to remain combined.
Determine the mechanism
Establish whether the governing separation depends on phase, size, density, selectivity or surface response.
Build the shortlist
Compare technically feasible arrangements, pretreatment requirements and operating limitations.
Validate before selection
Carry unresolved data, testing and performance requirements as explicit engineering holds.
Identify the governing separation mechanism.
Use measured properties and a defined performance envelope. No single technology is automatically suitable for every duty.
Gravity / Settling
Use where density difference, viscosity, particle or droplet size and available inventory support settling or coalescence.
Cyclonic / Inertial
Use where centrifugal or inertial forces can provide the required grade efficiency at the specified flow and pressure loss.
Coalescence
Use where dispersed droplets can be enlarged and separated, subject to wettability, interfacial behaviour and fouling.
Filtration / Centrifugation
Use where solids retention or phase separation requires a defined separation curve and controlled solids handling.
Gas Component Separation
Use where gas species must be selectively separated through a mixture-specific process mechanism.
Selective Solid Separation
Use where two solid populations have a measurable contrast in size, density, magnetic, electrical or surface response.
Do not select equipment from the phase list alone.
A phase list identifies the family of separation problem. The actual technology depends on the required outlet streams, contaminant form, physical properties and operating envelope.
SHORTLIST ≠ FINAL SELECTION Candidate arrangements must be compared against the applicable duty, evidence and validation requirements.
Compare the separation mechanisms.
A phase list identifies the separation route. The final technology shortlist depends on the required outlet streams, contaminant form, physical properties, operating conditions and available evidence.
Information Required Before Selection
A phase list alone is not sufficient for a firm separator selection. Use this checklist to establish the design basis before comparing technologies.
Duty & Outlets
Define every required product and reject stream.
- Purity and recovery
- Carryover / carry-under limits
- Residual solids, oil and water
- Required outlet pressure
Phase Flow Rates
Provide each phase separately across the operating range.
- Gas flow and volume basis
- Each liquid flow
- Each solid flow
- Start-up and turndown
Pressure & Temperature
Define the complete operating and design envelope.
- Operating and design ranges
- Vacuum conditions
- Downstream backpressure
- Allowable pressure loss
Gas Composition
Provide the full mixture, not only the principal components.
- Full species analysis
- Moisture and condensables
- Acid gases and trace contaminants
- Target species and product basis
Liquid Properties
Properties must be defined at actual operating conditions.
- Density and viscosity
- Miscibility and vapour pressure
- Surface / interfacial tension
- Conductivity and phase inversion
Droplets, Bubbles & Foam
Characterise dispersed phases and upset behaviour.
- Size distributions and loading
- Emulsion stability
- Foam tendency and upstream shear
- Slug volume, duration and frequency
Solid Properties
Separate solid populations where selective recovery is required.
- Concentration
- Particle-size distribution
- Density and shape
- A/B composition and liberation
Chemistry & Compatibility
Identify properties that can change separation behaviour or equipment life.
- pH, salts and solvents
- Oxidants and reactive species
- Fouling, wax and scaling
- Elastomer / media compatibility
Utilities & Installation
Confirm the physical and utility constraints of the package.
- Power, steam and cooling
- Water, instrument air and vacuum
- Footprint, height and weight
- Access, noise and location
Waste & Operation
Define what happens to every reject and operating stream.
- Gas, liquid and solids disposal
- Drain destination
- Regeneration and cleaning
- Backwash, consumables and standby
Evidence & Sampling
Establish the evidence available to support the selection.
- Representative samples
- Analytical methods
- Operating history
- Laboratory tests and uncertainty
Enquiry Hold
If product limits, phase flow rates or the governing separation property are unknown, do not force a firm selection.
Validate the technology
before selection.
Freeze the
design basis
Confirm the process duty, operating conditions, properties and required outlet streams.
Demonstrate separation
performance
Confirm that the proposed technology can achieve the required separation duty and outlet quality.
Demonstrate safe,
operable equipment
Check safe operation, maintainability, handling requirements and disposal arrangements.
Agree verification
& commercial boundaries
Define testing, verification, performance commitments and the commercial boundaries of the selection.
Is the selected arrangement
ready to be confirmed?
All mandatory validation gates must be addressed before the technology shortlist becomes a confirmed arrangement.
Confirm selected arrangement
All mandatory gates have been successfully addressed.
Change technology or sequence
The proposed arrangement does not satisfy the required basis.
Conditional shortlist + test hold
Document the unresolved requirement and define the required study, sample or separation test.
The flow is a technology-selection and validation route. It is not a P&ID, equipment sizing calculation or performance guarantee.
Ready to define your separation duty?
Start with the process phases, required outlet streams and available design information. Use the selection route to identify the relevant engineering case and develop a defensible technology shortlist.
