Case Study
November 21, 2023

Hydrogen Scrubbing System

Engineered for controlled hydrogen removal in fully recirculating ventilation systems, ensuring operation below LEL thresholds while meeting stringent spatial and safety constraints.

Read more
Case Study
March 07, 2023

Desander Cyclone Package

The Desander Cyclone Package project involved an advanced sand separation system for a client dealing with sand-laden flows in their process. Sand ingress was causing erosion and performance issues in downstream equipment, so the objective was to..
Read more
Case Study
January 20, 2024

Inline
De-Liquidizer

For an oil & gas facility in the Middle East, Kapwell provided an inline gas de-liquidizer to ensure dry gas delivery downstream. The client was experiencing issues with liquid carryover in their gas stream, which threatened downstream equipment..
Read more
Case Study
February 06, 2024

Two Phase Separator

Kapwell was engaged to design an advanced two-phase separator for a confidential client’s process. The separator’s role was to divide a mixed stream into gas and liquid with a high degree of purity in each output. The project required a compact vessel..
Read more
Case Study
June 09, 2022

3-phase
Separator

This case study involves a three-phase test separator skid designed for an oil and gas exploration operation in the Middle East. Such test separators are crucial in well testing – they separate oil, gas, and water from produced fluids so that each can be measured and analyzed.
Read more
Case Study
October 31, 2022

Mist
Eliminator

Kapwell was contracted to provide an advanced mist elimination system for an offshore oil & gas facility in the North Sea. The facility faced challenges with fine liquid droplets entrained in gas streams, which could lead to equipment fouling, inefficiencies..
Read more
Case Study
April 02, 2025

Compressor Suction Scrubber

This project was for a client in the natural gas industry who required a suction scrubber for a gas compressor. At the compressor inlet, it is critical to remove liquids and fine mists from the gas to prevent damage to the compressor blades and to ensure..
Read more
Case Study
March 10, 2023

Multi-Cyclone Fuel Gas Separation

The Multi-Cyclone Fuel Gas Separation project was initiated for an industrial client who needed to purify a small fuel gas stream feeding their equipment. The gas had a high load of fine dust and liquid droplets – on the order of kilograms of contaminants per cubic..
Read more
Case Study
February 18, 2025

Liquid H2S Scavenger Project

This case study focuses on a Liquid H₂S Scavenger system that Kapwell designed for a natural gas processing application. The client was dealing with raw gas containing high levels of hydrogen sulfide (H₂S) – around 500 ppm – which needed to be reduced..
Read more
Case Study
January 31, 2021

Mud Gas
Separator (MGS)

Kapwell was tasked to design a Mud Gas Separator for an oil and gas drilling operation in the Middle East. In drilling rigs, a mud gas separator (also known as a “poor boy degasser”) is critical for safely handling drilling mud returns that carry entrained gas, especially..
Read more
Case Study
January 04, 2022

Stainless steel cyclone

Kapwell was approached to manufacture a custom stainless steel cyclone for an oil & gas facility in the North Sea. In process piping systems, a cyclone is a pre-fabricated component (with flanges, bends, branches as needed) used to connect equipment

Read more
Case Study
May 25, 2024

Sand Jetting System for Oil & Gas Separators

Utilizing optimized nozzle placement, controlled jetting sequences, and directed slurry evacuation, Kapwell delivers a high-performance solution that minimizes turbulence while maximizing sand removal efficiency.

Read more
Case Study
July 09, 2025

Acid Fumes & Zinc Dust Separation

A targeted engineering solution to enhance particulate capture and fume control within a constrained footprint, ensuring compliance with the Pollution Prevention and Control (Scotland) Regulations 2000 (SSI 2000/323) and adherence to Best Available Techniques (BAT) and SEPA permit conditions.

Read more
Case Study
Feb 18, 2026

ABS Class Mud Gas Separator

Kapwell Ltd successfully delivered ABS MOU 2024 Class certified Mud Gas Separator (MGS) for a Seadrill offshore drilling application in just 8 weeks, significantly outperforming..

Read more
Case Study
May 21, 2026

Advanced Zinc & Acid Fume Extraction and Wet Scrubbing System

UK based client engaged Kapwell to design and supply a complete Zinc & Acid Fume Extraction Scrubber System for its industrial plant in the Scotland.

Read more

    Enquire Now