SEPARATOR SELECTION ENGINEERING REFERENCE

From Process Phases
to the Right Separation Technology

A structured engineering route from the client phase list to a defensible separation technology shortlist.

SEP-GUIDE-001 REV 01 05 SEPTEMBER 2026
SEPARATION DUTY
INPUT PROCESS
STREAM
→
IDENTIFY PHASE
COMBINATION
→
SELECT TECHNOLOGY
SHORTLIST

What phases are present
in your process stream?

Select all phases present in the separation duty. The phase combination determines the relevant engineering case.

SELECTION RESULT SELECT PHASES
PHASE COMBINATION

Select one or more phases

ENGINEERING CASE —
Choose the phases present in your process stream to identify the relevant separation route.
01
START WITH THE DUTY

Define what must be separated and the required outlet streams before selecting equipment.

ENGINEERING METHOD SELECTION WORKFLOW

From enquiry to technology shortlist.

A structured route keeps the separation duty, technology choice and validation requirements aligned.

01
DEFINE

Establish the Duty

Identify the required outlet streams and define the process separation duty.

→
02
ROUTE

Route the Enquiry

Match the phase combination to the relevant separation case and engineering route.

→
03
SHORTLIST

Select Technology

Follow the case flowchart and application notes to establish suitable technology candidates.

→
04
VALIDATE

Validate Before Selection

Confirm the design basis, separation performance, operability and verification boundaries.

MASTER SELECTION FLOWCHART

Follow every applicable branch.

Start with the required products and actual phases at operating pressure and temperature. Identify every applicable separation duty before selecting the technology combination.

FLOW LOGIC
YES Apply branch
NO Continue downward
UNKNOWN Obtain data / test
START Identify required products and actual phases at operating P/T
01
QUESTION

Gas components need separating?

Different molecular gas components require selective separation or a phase-changing process.

YES
ADD MOLECULAR GAS DUTY

CO₂, CH₄, H₂, N₂, O₂ and similar molecular separation duties.

02
QUESTION

Free gas and liquid both present?

Confirm the presence of free gas and liquid at the actual operating conditions.

YES
ADD GAS / LIQUID DISENGAGEMENT

Provide the required gas-liquid disengagement duty.

03
QUESTION

Two immiscible liquids need splitting?

Confirm that the two liquid labels represent distinct immiscible phases.

YES
ADD LIQUID / LIQUID DUTY

Consider liquid-liquid separation and emulsion behaviour.

04
QUESTION

Suspended solids need removal?

Identify whether solids must be removed from the gas, liquid or multiphase stream.

YES
ADD SOLIDS COLLECTION

Route to the applicable gas-solid, liquid-solid or multiphase duty.

05
QUESTION

Two solid fractions need separate products?

Confirm a measurable property contrast between the required solid products.

YES
ADD SELECTIVE SOLIDS DUTY

Use the applicable size, density, magnetic or surface contrast.

06
QUESTION

Required data or proof still missing?

Do not treat unknown information as a negative answer.

YES
HOLD FOR DATA / TESTING

Obtain samples, process data, separation tests or a feasibility study.

MATCH
Select the applicable separation combination.

Use the 20-case combination index and integrate all applicable separation duties into the proposed treatment sequence.

VERIFY

Are all duty, operating, safety and disposal requirements met?

YES → Technology shortlist confirmed    /    NO / UNKNOWN → Revise, test or hold

FINAL GATE VALIDATE BEFORE SELECTION
i

The arrows show technology-selection logic, not a P&ID. An OPTION is a candidate; an ADD box identifies a conditional stage. Complex feeds may require several linked separation duties.

SEPARATION COMBINATIONS ENGINEERING CASE INDEX

Find your separation case.

Twenty defined phase combinations provide the starting point for routing an enquiry to the appropriate separation technology.

01 GAS — GAS

Gas — Gas

Separation of gas components or mixed-gas streams.

CO₂ / CH₄  •  H₂ / CH₄  •  N₂ / O₂
02 GAS — LIQUID

Gas — Liquid

Free-gas and liquid disengagement duties.

Suction scrubber  •  Knockout drum  •  Degasser
03 GAS — SOLID

Gas — Solid

Removal of solid particles from a gas stream.

Dust collection  •  Catalyst fines  •  Receiver
04 LIQUID — LIQUID

Liquid — Liquid

Separation of immiscible or difficult liquid phases.

Oil / water  •  Solvent recovery  •  Emulsion
05 LIQUID — SOLID

Liquid — Solid

Removal or recovery of solids from a liquid stream.

Water desander  •  Clarification  •  Filter cake
06 SOLID — SOLID

Solid — Solid

Separation between different solid fractions.

Mineral grading  •  Metal / non-metal  •  Purification
07 GAS — GAS — LIQUID

Gas — Gas — Liquid

Selective gas absorption followed by gas/liquid separation.

CO₂ absorption  •  Gas / liquid disengagement
08 GAS — GAS — SOLID

Gas — Gas — Solid

Gas purification using a solid adsorbent.

Adsorbent purification  •  Dusty mixed gas
09 GAS — LIQUID — LIQUID

Gas — Liquid — Liquid

Three-phase gas, oil and water separation.

Production separator  •  Test separator
11 GAS — SOLID — SOLID

Gas — Solid — Solid

Gas carrying multiple solid particle fractions.

Coarse / fine particles  •  Mineral fractions
12 LIQUID — LIQUID — SOLID

Liquid — Liquid — Solid

Liquid-liquid separation with associated solids.

Oil / water / sand  •  Oily sludge
13 LIQUID — SOLID — SOLID

Liquid — Solid — Solid

Classification of two solid fractions in liquid.

Slurry classification  •  Mineral separation
14 GAS — GAS — LIQUID — LIQUID

Gas — Gas — Liquid — Liquid

Gas upgrading with hydrocarbon condensate and water.

Gas upgrading  •  Condensate / water
15 GAS — GAS — LIQUID — SOLID

Gas — Gas — Liquid — Solid

Wet and dusty gas requiring component removal.

Wet gas  •  Dust removal  •  Component removal
16 GAS — LIQUID — LIQUID — SOLID

Gas — Liquid — Liquid — Solid

Four-phase gas, oil, water and sand separation.

Gas / oil / water / sand
17 GAS — GAS — LIQUID — LIQUID — SOLID

Gas — Gas — Liquid — Liquid — Solid

Mixed-gas upgrading with condensate, water and sand.

Gas upgrading  •  Wet solids-containing gas
18 LIQUID — LIQUID — SOLID — SOLID

Liquid — Liquid — Solid — Solid

Liquid separation with two recoverable solid fractions.

Coarse mineral  •  Fine catalyst fractions
19 GAS — LIQUID — SOLID — SOLID

Gas — Liquid — Solid — Solid

Aerated slurry containing multiple solid fractions.

Coarse sand  •  Fine catalyst
No matching separation cases found.
Separator Selection
CASE 01

Gas-Gas

Separation of molecular components within one gas phase

Separation Duty

Gas-Gas Separation

Separate molecular components within one gas phase.

Technology Shortlist
1

Technology Option

Technology description.

Critical qualification.
2

Technology Option

Technology description.

Critical qualification.
3

Technology Option

Technology description.

Critical qualification.
Specify Before Quoting

Illustrative Treatment Train

Reject / Secondary Route

Limits / Common Selection Errors

Validation Required

VALIDATE

SEPARATOR SELECTION ENGINEERING CASE
CASE 01

Gas – Gas

CO₂ / CH₄ · H₂ / CH₄ · N₂ / O₂

SEPARATION DUTY

Separate molecular gas components

Separate molecular components within one gas phase and define the valuable product together with its required purity and recovery.

ENGINEERING ROUTE

Follow the applicable case flowchart

Compare candidate arrangements against the actual process conditions, outlet requirements and available operating data.

TECHNOLOGY SHORTLIST
01

Membrane / PSA

Consider for compatible gas pairs when pressure and regeneration conditions are practical.

QUALIFY: Purity-recovery curves, feed limits and tail-gas quantities.
02

Absorption / TSA

Consider solvent affinity or strong selective adsorption, including trace polishing.

QUALIFY: Heat, chemicals, degradation, regeneration and waste.
03

Cryogenic / Hybrid

Consider recoverable condensables, multiple products or suitable larger-scale duties.

QUALIFY: Phase envelope, cold-end contaminants and energy balance.
BEFORE SELECTING EQUIPMENT
01 Full molar composition including water, heavy hydrocarbons and trace poisons.
02 Minimum / normal / maximum gas flow.
03 Operating pressure and temperature.
04 Product and reject specifications.
05 Electricity, cooling, steam and vacuum availability.
CONFIGURATION TO EVALUATE
FEED
CONDITIONING
→
GAS SEPARATION
MODULE
→
PRODUCT
POLISHING / COMPRESSION

Reject gas → recovery, recycle or authorised treatment.

IMPORTANT
A knockout drum, cyclone or mesh pad does not separate a homogeneous gas mixture.

Gas purity and recovery are different objectives. Assess both with a component mass balance.

VALIDATION REQUIRED

Validate before selection

Require a process simulation or vendor model across the operating envelope, supported by separation data for the actual mixture.

✓ ACTUAL MIXTURE
SEPARATION DATA REQUIRED
TECHNOLOGY SHORTLIST ENGINEERING LOGIC

From separation duty
to a defensible shortlist.

Select the separation mechanism against the actual duty, required outlet streams and governing physical properties. Equipment is selected only after the duty is defined.

01
+
DEFINE

Establish the duty

Identify what must be removed, recovered, retained or allowed to remain combined.

→
02
◇
IDENTIFY

Determine the mechanism

Establish whether the governing separation depends on phase, size, density, selectivity or surface response.

→
03
≡
COMPARE

Build the shortlist

Compare technically feasible arrangements, pretreatment requirements and operating limitations.

→
04
✓
VERIFY

Validate before selection

Carry unresolved data, testing and performance requirements as explicit engineering holds.

SCREENING CRITERIA

Identify the governing separation mechanism.

Use measured properties and a defined performance envelope. No single technology is automatically suitable for every duty.

01 PHYSICAL
↓

Gravity / Settling

Use where density difference, viscosity, particle or droplet size and available inventory support settling or coalescence.

CHECK Density difference · viscosity · size distribution · residence time
02 INERTIAL
↻

Cyclonic / Inertial

Use where centrifugal or inertial forces can provide the required grade efficiency at the specified flow and pressure loss.

CHECK Flow · loading · phase fraction · density · pressure loss
03 DROPLET
◌

Coalescence

Use where dispersed droplets can be enlarged and separated, subject to wettability, interfacial behaviour and fouling.

CHECK Droplet population · interfacial tension · fouling · emulsion
04 SOLIDS
▤

Filtration / Centrifugation

Use where solids retention or phase separation requires a defined separation curve and controlled solids handling.

CHECK Solids load · retention · filterability · cleaning · discharge
05 SELECTIVE
⇄

Gas Component Separation

Use where gas species must be selectively separated through a mixture-specific process mechanism.

CHECK Equilibrium · selectivity · kinetics · purity · recovery · utilities
06 SELECTIVE
A/B

Selective Solid Separation

Use where two solid populations have a measurable contrast in size, density, magnetic, electrical or surface response.

CHECK Size-by-assay · liberation · density · magnetic · surface response
!
ENGINEERING RULE

Do not select equipment from the phase list alone.

A phase list identifies the family of separation problem. The actual technology depends on the required outlet streams, contaminant form, physical properties and operating envelope.

SHORTLIST ≠ FINAL SELECTION    Candidate arrangements must be compared against the applicable duty, evidence and validation requirements.

TECHNOLOGY SHORTLIST ENGINEERING COMPARISON

Compare the separation mechanisms.

Select the separation mechanism against the actual duty, required outlet streams and governing physical properties. The shortlist is a starting point for engineering evaluation.
TECHNOLOGY
PRIMARY DUTY
GOVERNING BASIS
TYPICAL APPLICATION
STATUS
01 Gravity / Settling
Phase or particle disengagement
Density difference
Gas-liquid separation · solids settling
PHYSICAL
02 Cyclonic / Inertial
Droplet or particle removal
Inertial forces
Gas scrubbers · particulate removal
INERTIAL
03 Coalescence
Fine droplet separation
Droplet interaction and coalescence
Mist elimination · liquid-liquid separation
DROPLET
04 Filtration / Centrifugation
Solid removal or clarification
Particle size and density
Process filtration · solids recovery
SOLIDS
05 Gas Component Separation
Selective gas-species removal
Equilibrium · selectivity · kinetics
CO₂ removal · gas upgrading
SELECTIVE
06 Selective Solid Separation
Separation of solid fractions
Size · density · magnetic · surface response
Mineral grading · catalyst recovery
SELECTIVE
!
ENGINEERING RULE Do not select equipment from the phase list alone.

A phase list identifies the separation route. The final technology shortlist depends on the required outlet streams, contaminant form, physical properties, operating conditions and available evidence.

CONTINUE SELECTION Return to the relevant separation case.
VIEW CASES →
ENGINEERING ENQUIRY

Information Required Before Selection

A phase list alone is not sufficient for a firm separator selection. Use this checklist to establish the design basis before comparing technologies.

01

Duty & Outlets

Define every required product and reject stream.

  • Purity and recovery
  • Carryover / carry-under limits
  • Residual solids, oil and water
  • Required outlet pressure
02

Phase Flow Rates

Provide each phase separately across the operating range.

  • Gas flow and volume basis
  • Each liquid flow
  • Each solid flow
  • Start-up and turndown
03

Pressure & Temperature

Define the complete operating and design envelope.

  • Operating and design ranges
  • Vacuum conditions
  • Downstream backpressure
  • Allowable pressure loss
04

Gas Composition

Provide the full mixture, not only the principal components.

  • Full species analysis
  • Moisture and condensables
  • Acid gases and trace contaminants
  • Target species and product basis
05

Liquid Properties

Properties must be defined at actual operating conditions.

  • Density and viscosity
  • Miscibility and vapour pressure
  • Surface / interfacial tension
  • Conductivity and phase inversion
06

Droplets, Bubbles & Foam

Characterise dispersed phases and upset behaviour.

  • Size distributions and loading
  • Emulsion stability
  • Foam tendency and upstream shear
  • Slug volume, duration and frequency
07

Solid Properties

Separate solid populations where selective recovery is required.

  • Concentration
  • Particle-size distribution
  • Density and shape
  • A/B composition and liberation
08

Chemistry & Compatibility

Identify properties that can change separation behaviour or equipment life.

  • pH, salts and solvents
  • Oxidants and reactive species
  • Fouling, wax and scaling
  • Elastomer / media compatibility
09

Utilities & Installation

Confirm the physical and utility constraints of the package.

  • Power, steam and cooling
  • Water, instrument air and vacuum
  • Footprint, height and weight
  • Access, noise and location
10

Waste & Operation

Define what happens to every reject and operating stream.

  • Gas, liquid and solids disposal
  • Drain destination
  • Regeneration and cleaning
  • Backwash, consumables and standby
11

Evidence & Sampling

Establish the evidence available to support the selection.

  • Representative samples
  • Analytical methods
  • Operating history
  • Laboratory tests and uncertainty
!

Enquiry Hold

If product limits, phase flow rates or the governing separation property are unknown, do not force a firm selection.

CONDITIONAL SHORTLIST Issue a conditional technology shortlist and define the evidence required to close the gaps.
VALIDATION RELEASE GATES

Validate the technology
before selection.

Selection is not complete until the proposed arrangement has been checked against performance, safety, operability and verification requirements.
01
+
DESIGN BASIS

Freeze the
design basis

Confirm the process duty, operating conditions, properties and required outlet streams.

MANDATORY GATE
→
02
◇
PERFORMANCE

Demonstrate separation
performance

Confirm that the proposed technology can achieve the required separation duty and outlet quality.

MANDATORY GATE
→
03
✓
OPERABILITY

Demonstrate safe,
operable equipment

Check safe operation, maintainability, handling requirements and disposal arrangements.

MANDATORY GATE
→
04
=
VERIFICATION

Agree verification
& commercial boundaries

Define testing, verification, performance commitments and the commercial boundaries of the selection.

MANDATORY GATE
RELEASE DECISION

Is the selected arrangement
ready to be confirmed?

All mandatory validation gates must be addressed before the technology shortlist becomes a confirmed arrangement.

✓
YES TECHNOLOGY SHORTLIST CONFIRMED
!
NO / UNRESOLVED REVISE, TEST OR HOLD
01

Confirm selected arrangement

All mandatory gates have been successfully addressed.

02

Change technology or sequence

The proposed arrangement does not satisfy the required basis.

03

Conditional shortlist + test hold

Document the unresolved requirement and define the required study, sample or separation test.

i

The flow is a technology-selection and validation route. It is not a P&ID, equipment sizing calculation or performance guarantee.

SEPARATOR SELECTION NEXT ENGINEERING STEP

Ready to define your separation duty?

Start with the process phases, required outlet streams and available design information. Use the selection route to identify the relevant engineering case and develop a defensible technology shortlist.

ENGINEERING WORKFLOW
01 Define the duty
02 Identify the separation route
03 Build the technology shortlist
04 Validate before selection
TECHNICAL ENQUIRY Discuss your separation requirement with our engineering team.
CONTACT US →

    Enquire Now